Are you looking for the stock ROM of your device Infinix Note 3 Pro X601 LTE? If yes your answer, you are on the right page. We have given the direct link to download Infinix Note 3 Pro X601 LTE stock ROM.
Download Infinix Note 3 Pro X601 LTE stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the scatter file.
Download Infinix Note 3 Pro X601 LTE Stock ROM
Stock ROM File Name: Infinix_Note_3_Pro_X601-LTE_MT6735_H537A-N-170520_7.0.zip
Stock ROM File Size: 2 GB
Android OS Version: 7.0
How To Flash Stock ROM On Your Device
Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.
Step 2: Now download Infinix Note 3 Pro X601 LTE USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.
Step 3: Next, switch off your Infinix Note 3 Pro X601 LTE smartphone and remove the battery (if it is removable).
Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.
Step 5: Once SP Flash tool is launched, click on “Download” tab.
Step 6: Now, click on “scatter-loading” button in the download tab.
Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.
Step 8: Now click on the “Download” button to start the flashing process.
Step 9: Next, connect your Infinix Note 3 Pro X601 LTE Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.
Step 10: The flashing process will begin momentarily and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.
Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.
That’s it. Now you have successfully flashed stock ROM on your Infinix Note 3 Pro X601 LTE Android device. If you encounter any issues while following this tutorial, do let me know via comments.
The Second One says
Now after the flashing, the phone doesn’t read sim cards
Sathishkumar Varatharajan says
Hi follow this procedure.
1) Go to the “Settings” and Tab on the “More Networks”,
2) Then Click on “Mobile Networks” Next, make sure your Network mode SIM is on “WCDMA” common for the both 3G and 4G,
3) Once done, The following steps are doesn’t work “Network Operators” -> Search network -> Select preferred network, That’s it.
The Second One says
No that’s not the issue.
I would have figured it out if it was that simple… Lol.
The thing is….
I’ve flashed the Infinix note 3 pro, and after that… Everything’s OK. Just some details are wrong….
1 – when I check the Factory reset mode I get “Fail de calibrate FL & RF……..(I don’t remember) so it’s kinda hard to enter that mode again.
2 – Simcards are inserted but aren’t read.
That is… Those menus you’ve mentioned earlier are
greyed. So can’t access those to configure 2,3 and 4 G…
N or choose any operator.
I hope you understand the issue.
Also I realised that the phone doesn’t have an Imei.
I tried SN tool writer but, seems like I didn’t install all the
Required drivers….despite all the tutorials I went
Through.
So… That’s it.