Do you own a Lanix smartphone or tablet? Are you searching for the stock ROM for your Lanix device? If yes is your answer to both of these questions, then you have landed in the right place. Here you can download Lanix stock ROM for all models.
Download Lanix stock ROM from here (based on the model number of your device, flash it on your smartphone or tablet using a flash tool and get back the native Android experience again. If you have corrupted your Lanix device, flashing stock ROM on your device is the only way to get it back to a working condition again.
Download Lanix Stock ROM
| Lanix Models | Android Version | Download Stock ROM |
|---|---|---|
| Lanix L530 Claro | 8.1.0 | Download Now |
| Lanix Ilium L820 | 4.4.2 | Download Now |
| Lanix Ilium L400 Telcel | 5.1 | Download Now |
| Lanix Ilium X260 Telcel | 6.0 | Download Now |
| Lanix Ilium X100 Claro | 4.4.2 | Download Now |
| Lanix Ilium L610 Telcel | 6.0.1 | Download Now |
| Lanix X500 B | 5.1 | Download Now |
| Lanix Ilium X110 Telcel | 4.4.2 | Download Now |
| Lanix Ilium X200 Claro | 4.4.2 | Download Now |
| Lanix Ilium X210 Claro | 5.1 | Download Now |
| Lanix Ilium X710 Telcel | 6.0 | Download Now |
| Lanix S106 Telcel | 4.4.2 | Download Now |
| Lanix S220 | 4.2.2 | Download Now |
| Lanix S670 | 4.4.2 | Download Now |
| Lanix X210 Telcel | 5.1 | Download Now |
| Lanix Ilium X200 Telcel | 4.4.2 | Download Now |
| Lanix Ilium X110 Claro | 4.4.2 | Download Now |
| Lanix Ilium Pad T7X | 5.1 | Download Now |
| Lanix Ilium L200 Telcel | 5.1 | Download Now |
| Lanix Ilium L200 Claro | 5.1 | Download Now |
| Lanix Ilium X210 | 5.1 | Download Now |
| Lanix Ilium X710 | 6.0 | Download Now |
| Lanix Ilium X200 | 4.4.2 | Download Now |
| Lanix Ilium X120 | 6.0 | Download Now |
| Lanix Ilium S520 | 4.4.2 | Download Now |
Points To Remember
1) Download Lanix USB drivers and install it on your computer for connecting your device to PC or laptop computer.
2) All the stock ROM files given here are officially provided by Lanix Mobile. So, if you face any errors while flashing stock ROM on your device, contact their support team.
3) If you are unable to find the stock ROM file for your Lanix device in the above table, kindly let us know by leaving a comment below.
4) After flashing stock ROM file on your Lanix device, make sure that you flash the original IMEI using an IMEI tool.
5) You can get rooting tutorials, custom recovery installation tutorials, etc., for your Lanix device by visiting rootmydevice.com!
Hello dear
I need stock room for Lanix Ilium M1. for Claro /Telcel company. because when tray install another room downloaded from web forums but got this error (this phone will accept only factory signed) firmware was used NCK Box during this procedure
Hope can you help me .
Regards
————————————Error for Flash Firmware ————————————–
Action : Firmware update.
Selected Model: 0-By CPU: MT6580
Exe version: NCKBox AndroidMTK 2.0
Scenario: [4]Full format + Flash
Will be used loader: DA_SWSEC_1640_K300_TRUNK_01.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now…
Detected : MediaTek PreLoader USB VCOM (Android) (COM36)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected…Please wait
Sending DA agent, please wait…
—————————————————-
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
—————————————————-
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
—————————————————-
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM37)
Preloader backup already exist, skip saving.
[2]FORMAT – BEGIN: 0x0 – LEN: 0x1d2000000
Starting flash.
Send preloader…
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
[0]All done.
Hi, We will add the Stock ROM for your device as soon as possible. Thanks!