Are you looking for the stock ROM of your device Cube T8 PA? If yes your answer, you are on the right page. We have given the direct link to download Cube T8 PA stock ROM.
Download Cube T8 PA stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool, and the scatter file.
Download Cube T8 PA Stock ROM
Stock ROM File Name: Cube_T8_PA_MT8783_20170517_6.0.zip
Stock ROM File Size: 887 MB
Android OS Version: 6.0
How To Flash Stock ROM On Your Device
Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.
Step 2: Now download Cube T8 PA USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.
Step 3: Next, switch off your Cube T8 PA smartphone and remove the battery (it is removable).
Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.
Step 5: Once SP Flash tool is launched, click on “Download” tab.
Step 6: Now, click on “scatter-loading” button in the download tab.
Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.
Step 8: Now click on the “Download” button to start the flashing process.
Step 9: Next, connect your Cube T8 PA Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.
Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.
Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.
That’s it. Now you have successfully flashed stock ROM on your Cube T8 PA Android device. If you encounter any issues while following this tutorial, do let me know via comments.
Olusanya Oginni says
i flashed the above firmware on my cube t8-pa which completed successfully but it was stuck to landscape and the touch does to align. my tablet product number is :T8PA16GB17132100288.
Sathishkumar Varatharajan says
Hi, You Can try factory reset method follow this procedure.
1) Hold the “Volume Up” button and hold the “Power button”.
2) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
3) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.
Olusanya Oginni says
I JUST TRIED IT BUT STILL DID NOT WORK. RECOVERY MODE IT SELF IS DISPLAYED IN LANDSCAPE INSTEAD OF PORTRAIT.
Sathishkumar Varatharajan says
What kind of error are you getting?
Olusanya Ogiini says
No error just the touch not align with the screen orientation.
Sathishkumar Varatharajan says
Hi, You Can try factory reset method follow this procedure.
1) Hold the “Volume Up” button and hold the “Power button”.
2) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
3) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.