Are you looking for the Stock ROM of your device Samsung Galaxy S3 GT-I9300? If yes your answer, you are in the right page. We have given the direct link to download Samsung Galaxy S3 GT-I9300 stock ROM.
Download Samsung Galaxy S3 GT-I9300 Stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the Stock ROM file.
Download Samsung Galaxy S3 GT-I9300 Stock ROM
Stock ROM File Name: I9300XXALEF_I9300ODDALE7_INU.zip
Stock ROM File Size: 760 MB
Android OS Version: 4.0.4
Stock ROM File Name: I9300XXEMH4_I9300ODDEMK1_INU.zip
Stock ROM File Size: 894 MB
Android OS Version: 4.1.2
Stock ROM File Name: I9300XWUGML4_I9300ODDGML4_INU.zip
Stock ROM File Size: 906 MB
Android OS Version: 4.3
How To Flash Stock ROM On Your Device
Step 1: To get started, download Samsung Galaxy S3 GT-I9300 USB driver and install it in your computer. Once done, download the stock ROM of your device and extract the zip file to get the “.tar.md5” file as shown below.
Step 2: Next, switch off your smartphone. Once done, boot it into the “Download” mode by pressing and holding the Volume Down, Power and Home buttons simultaneously. Now your Samsung device will vibrate. Once you have felt it, keep pressing the Volume Down and Home buttons (leave the Power button) and your device will boot into the Download mode.
Step 3: Now you will see a “Warning” message as shown below. Just press the “Volume Up” key to continue.
Step 4: Next, download Odin and extract it to a folder in your computer. Once done, click on “Odin3.exe” to launch its window.
Step 5: Now connect your smartphone to the computer using the original USB data cable. If you have installed the USB drivers of your device properly in the Windows computer, Odin will automatically identify your device and will show a “Added” message in the “Log” section.
Step 6: Next, click on the “AP” button and select the “.tar.md5” file (from Step 1).
Step 7: Once the Samsung stock ROM file is added, click on “Start” button in “Odin” to launch the flashing process.
Step 8: Don’t do anything during the flashing process. Once it gets completed, you will see the green “PASS” message as shown in the screenshot below.
Step 9: Now unplug your device from the computer. But when you try to boot your device normally, it will get into a boot loop. To fix this error, switch off your smartphone and boot into the “Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously.
Step 10: Once your device boots into the recovery mode, click on “Wipe data/factory reset“. Once done, click on “Reboot System Now” as shown in the screenshot below.
That’s it. Now you have successfully flashed Stock ROM on your Samsung Galaxy S3 GT-I9300 Android device. If you encounter any issues while following this tutorial, do let me know via comments.
darren husband says
hi i downgraded my samsung s3 to 4.0.4 from 4.3 and my imei changed to oo40???? i can’t use the phone any more any ideas?
Alex says
Well explained. thanks.
hridoy khan says
samsungj2 firmwares file
Sathishkumar Varatharajan says
Hi, we have added it in our list. Please follow this guide: https://stockromfiles.com/samsung-galaxy-j2-sm-j200h-firmware/
Alex k says
You are powerful, could you pls send me the native ROM for s4 active,thank you
Sathishkumar Varatharajan says
Hi, we have added it in our list. Please follow this guide: https://stockromfiles.com/samsung-galaxy-s4-active-gt-i9295-firmware/
lisa says
hi i followed all steps and it seemed like all stages were done properly then i get to the final step and reboot my device and it is now stuck on the samsung boot up screen and phone wont fully turn on
Sathishkumar Varatharajan says
Hi, You Can try the factory reset method(but you will lose all the data on your device):
1) First, “Power Off” the device.
2) Hold the “Volume Up” button and hold the “Power button”.
3) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
4) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.
Abhimanyu says
i am stuck on samsung boot up screen where samsung s3 gt-i9300 is written
Boopathy Sundaramoorthy says
Hi, You Can try the factory reset method(but you will lose all the data on your device):
1) First, “Power Off” the device.
2) Hold the “Volume Up” button and hold the “Power button”.
3) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
4) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.
garry says
hi
i stupidly wiped system from phone all im left with is twrp recovery but
it doesn’t see zip files on sd card im looking for stock rom to recover my s3
but computer doesnt recognize fone i think i uk version of this rom.