Are you looking for the Stock ROM of your device Samsung Galaxy J1 Ace SM-J110H? If yes your answer, you are in the right page. We have given the direct link to download Samsung Galaxy J1 Ace SM-J110H stock ROM.
Download Samsung Galaxy J1 Ace SM-J110H Stock ROM from here, flash it in your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool and the Stock ROM file.
Download Samsung Galaxy J1 Ace SM-J110H Stock ROM
Stock ROM File Name: J110HXXU0APB2_J110HODD0APB1_INS.zip
Stock ROM File Size: 504 MB
Android OS Version: 4.4.4
How To Flash Stock ROM On Your Device
Step 1: To get started, download Samsung Galaxy J1 Ace SM-J110H USB driver and install it in your computer. Once done, download the stock ROM of your device and extract the zip file to get the “.tar.md5” file as shown below.
Step 2: Next, switch off your smartphone. Once done, boot it into the “Download” mode by pressing and holding the Volume Down, Power and Home buttons simultaneously. Now your Samsung device will vibrate. Once you have felt it, keep pressing the Volume Down and Home buttons (leave the Power button) and your device will boot into the Download mode.
Step 3: Now you will see a “Warning” message as shown below. Just press the “Volume Up” key to continue.
Step 4: Next, download Odin and extract it to a folder in your computer. Once done, click on “Odin3.exe” to launch its window.
Step 5: Now connect your smartphone to the computer using the original USB data cable. If you have installed the USB drivers of your device properly in the Windows computer, Odin will automatically identify your device and will show a “Added” message in the “Log” section.
Step 6: Next, click on the “AP” button and select the “.tar.md5” file (from Step 1).
Step 7: Once the Samsung stock ROM file is added, click on “Start” button in “Odin” to launch the flashing process.
Step 8: Don’t do anything during the flashing process. Once it gets completed, you will see the green “PASS” message as shown in the screenshot below.
Step 9: Now unplug your device from the computer. But when you try to boot your device normally, it will get into a boot loop. To fix this error, switch off your smartphone and boot into the “Recovery” mode by pressing and holding the Volume Up, Power and Home buttons simultaneously.
Step 10: Once your device boots into the recovery mode, click on “Wipe data/factory reset“. Once done, click on “Reboot System Now” as shown in the screenshot below.
That’s it. Now you have successfully flashed Stock ROM on your Samsung Galaxy J1 Ace SM-J110H Android device. If you encounter any issues while following this tutorial, do let me know via comments.
pranab parui says
file write set dead
what do you mean ??? Is your phone bricked???
please help ! My phone became dead after flashing this firmware .. My phone wont start up .. how to fix this ???? please help.
Sathishkumar Varatharajan says
Hi, You Can try factory reset method follow this procedure.
1) Hold the “Volume Up” button and hold the “Power button”.
2) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
3) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.
Thanks for your response .!! But It is not giving any response . It is not going to both odin mode and recovery mode. Not even showing charging sign . I tried downloading drivers but it is not showing any response when i connect tp pc. is there any way to fix this without any special hardware like JTAG or boxes ???just through USB port ??
sorry I didn’t mean its not booting I meant It is not turning on. Before flashing it used to boot upto samsung logo and stuck. But now it is completely dead. I checked battery but it has enough charge..I installed samsung ,android and spd drivers but It is not shown in port list on device manager also .. Please reply how to solve this??
have you tried to reflash it ?
perfect, worked for me . except i didnt have to do the very last step ,step 10 . it booted and optimized and boom .