Are you looking for the stock ROM for your device Kingzone N5? If yes your answer, you are on the right page. We have given the direct link to download Kingzone N5 stock ROM.
Download Kingzone N5 stock ROM from here, flash it on your device and enjoy the native Android experience again. The download file contains the USB driver, flash tool, and the scatter file.
Download Kingzone N5 Stock ROM
Stock ROM File Name: Kingzone_N5_MT6735_5.1.zip
Stock ROM File Size: 551 MB
Android OS Version: 5.1
How To Flash Stock ROM On Your Device
Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.
Step 2: Now download Kingzone N5 USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.
Step 3: Next, switch off your Kingzone N5 smartphone and remove the battery (if it is removable).
Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe” file in it. Launch it.
Step 5: Once SP Flash tool is launched, click on “Download” tab.
Step 6: Now, click on “scatter-loading” button in the download tab.
Step 7: Next, click on “Open Scatter File” and select the scatter file from Step 1. For reference see the image given below.
Step 8: Now click on the “Download” button to start the flashing process.
Step 9: Next, connect your Kingzone N5 Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.
Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK” green ring in SP Flash Tool.
Step 11: Now, close SP Flash tool on your computer and unplug your smartphone.
That’s it. Now you have successfully flashed stock ROM on your Kingzone N5 Android device. If you encounter any issues while following this tutorial, do let me know via comments.
Hi, I’ve used the firmware for Kingzone N5, It was successful but now my screen black when it is powered on. What could be the problem?
Hi, You Can try factory reset method follow this procedure.
1) Hold the “Volume Up” button and hold the “Power button”.
2) Next, Using the Volume Up or Volume Down Keys navigate the options to select “Wipe cache partition” and press the “Power button” to confirm.
3) Once Done, Using the Volume Keys select “Wipe Data/ factory reset” and use the power button to initiate the process. Now restart your android device, That’s it.
The screen is black, I cannot see anything, just a dim light but no content is seen on the screen. The phone is still new, no cracks and it has not been dropped down.
Have been trying to contact them but no responses.